RoBox

Garden Tap Connector - 7/8 BSP - Suitable for Farmers Tap - Large Outside Tap

7/8BSP Tap Connector
Vernier showing 7/8BSP is not the same as 7/8inch
Showing tap with connector
Brass component with o-ring and seal
RoBox

Garden Tap Connector - 7/8 BSP - Suitable for Farmers Tap - Large Outside Tap

7/8 BSP BRASS TAP CONNECTOR FOR OUTSIDE TAPS AND STANDARD HOSE FITTINGS

Do you need a connector for your garden tap? Can't get a tap connector to fit your tap? Unable to get the one you need from the DIY Hardware shop or the Garden Centre? Tried a 1 inch BSP and it was too big for your garden tap or a standard 3/4 and it was too small. Its likely you need a 7/8 BSP.

Most large sized garden taps with 3/4BSP stamped on them are referred to as "farmers taps", the 3/4 refers to the inlet size (where it screws into the wall fitting), the 7/8BSP is the thread on the outlet where you connect your hose pipe. Will fit any 7/8G parallel thread.

Not only will our connector allow you to connect you garden hose to your outside tap it has a solid brass construction with O-ring and washer included. Suitable for Hozelock/Gardena style fittings.

PLEASE NOTE: 7/8 refers to the BSP size NOT the actual size of the fitting. Please refer to the listing photographs. If you are measuring 7/8" on your tap outlet (i.e. 22mm) diameter it is likely you have an old 5/8" thread. Please contact us if you have any doubts, we are more than happy to help. It is very common for customers to size these components incorrectly. 

Remember, if you have any doubts about the sizing or compatibility, our team is always here to help. Get your garden tap connector today and finally be able to connect to your tap!

£0.00
£10.80

QTY

You’ll earn 0 reward points with this purchase.

Reviews

Be the first to review this product.

Leave a review

Leave a review

close